Access Denied

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

I can login on admin section, I see all the options but when I hit them I recieve the blank page with "Access Denied" message.

dunno what to change...

I had checked the table nuke_authors and this is looking good:

Code:

CREATE TABLE `nuke_authors` (
`aid` varchar(25) NOT NULL default '',
`name` varchar(50) default NULL,
`url` varchar(255) NOT NULL default '',
`email` varchar(255) NOT NULL default '',
`pwd` varchar(40) default NULL,
`counter` int(11) NOT NULL default '0',
`radminsuper` tinyint(1) NOT NULL default '1',
`admlanguage` varchar(30) NOT NULL default '',
PRIMARY KEY (`aid`),
KEY `aid` (`aid`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1;

--
-- Dumping data for table `nuke_authors`
--

INSERT INTO `nuke_authors` VALUES ('bsr', 'God', 'http://www.domain.com', 'contact@domain.com', 'md5pass', 35, 1, '');

changed site link, e-mail, and password for not spamming here.

On this pages I recieve the blank page with "Access Denied" message:

Only registered users can see links on this board!
Get registered or login to the forums!

- Access Denied on top of the page but page is loading and its working (now)

Pages that work and don't have the message:

Only registered users can see links on this board!
Get registered or login to the forums!

(this with Access Denied message on top of the page but options are working)

I posted this on other forums but I still don't get the answer!

Nuke 7.6 with the last patch from CS

Thank you for the time,
C.

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

well looks to me that you messed up somewhere...
try to go back on the things you did,this doesnt happen sudenly.. Smile

Raven · Posted: Sat Jun 11, 2005 5:16 am

What version of nuke? See if this post helps at all:

Only registered users can see links on this board!
Get registered or login to the forums!

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

Maybe,
I made a new user database, made all from the beging testing if is it comming from mysql...but nothing happen.

I uploaded the nuke 7.6 without patch... -> Illegal File Access .... after this I uploaded patch by patch wathing the results and -> "Access Denied" again.

It's something wrong in admin.php/ admin files because the variables don't go in modules (I deleted module Topics and then tried

Only registered users can see links on this board!
Get registered or login to the forums!

and the same message)

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

I tried the thing with adding before ?> $_SERVER['SCRIPT_NAME'] = $_SERVER['PHP_SELF']; or $_SERVER['PHP_SELF'] = $_SERVER['SCRIPT_NAME']; but nothing happen.

I have a question? Why I can access some admin pages and others no?

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

"I uploaded the nuke 7.6 without patch... -> Illegal File Access "
sounds like some mixed up files..

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

The mixed up files should be admin.php / admin folder / includes and db folder because when I uploaded the 7.6 without patch the rest I left intact with last patch and only them was changed (admin,includes&db).

Running phpinfo() shows /phpinfo.php as being the variable for PHP_SELF

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

well isnt it better to start clean...?
just upload patched 7.6..

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

I allredy done it, actualy now I have only last patch 7.6 on site and

CODR3SH wrote:

On this pages I recieve the blank page with "Access Denied" message:

Only registered users can see links on this board!
Get registered or login to the forums!

- Access Denied on top of the page but page is loading and its working (now)

Pages that work and don't have the message:

Only registered users can see links on this board!
Get registered or login to the forums!

(this with Access Denied message on top of the page but options are working)

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

well that is not possible...
to my opinion your messing things up..
i suggest deleting all and check what version/patched 7.6 you realy are uploading...

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

Same problem ... nuke 7.6 with last patch is on the web.

Maybe I'll try install in paralel nuke 7.7 and the patch of it. I want to ask what's the best way to save information from "old" nuke to "the" new nuke? Because I guess 7.7 have some tables changed than 7.6

Thank you, in a few hours I'll start the "process" of intalling new nuke...later

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

well im sure you have read all the bad security stuff about the 7.7?
so why the 7.7 anyway...

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

Sure, but I thought that with CS patch this will go away... isn't true?

I can try 7.8 but dunno if some modules or blocks will work with it.

I'm waiting ideas.

Thank you for the time.

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

well some point you have to take some advice..
and thats simple,trash the rest and go for the fresh 7.6

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

Ok than, I'll install fresh 7.6 and then the patch, now the new question is ... what I'll do with modules that are not from 7.6 (taken from NScripts,NCops or other made better)... leave them how they are and delete only files I'm using from 7.6? and upload them again?

P.S.: if you would like and have a Y! Id or something elese, send it to me on PM so I can send and recieve what is going wrong faster. Thank you.

hitwalker · Sells PC To Pay For Divorce Joined: Posts: 5661

listen,installing can be as easy as riding a bike..
there arent that many changes with modules...
just upload the new patched 7.6 and change folder after folder by renaming it like blocks to blocks-old
step by step put everything back that you used...
as for stuff of nukescripts....just used the edited core files and if needed upgrade the used versions.

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

All data was restored to a new install nuke 7.6 with last patch...everything seems to work fine but now I have onother problem in Forum Administration ... I have 2.0.15 and when I want to add moderator status to a user I recieve:

Code:

DEBUG MODE

SQL Error : 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ') AND aa.group_id = ug.group_id AND aa.auth_mod = 1 GROUP BY ug.' at line 3

SELECT ug.user_id, COUNT(auth_mod) AS is_auth_mod FROM nuke_bbauth_access aa, nuke_bbuser_group ug WHERE ug.user_id IN () AND aa.group_id = ug.group_id AND aa.auth_mod = 1 GROUP BY ug.user_id

Line : 528
File : admin_ug_auth.php

Users and settings are from the "old" database. Not all the users can't be moderator ... tried to some others and worked but for what I want no...

I will look on sql to see the difference betwen those who can be and those who can't...but if someone have a better idea, please post .

Thank You.

chatserv · Posted: Tue Jun 14, 2005 3:24 pm

As a first step place the following into a file and save it as fixgroup.php

Code:

<?php
//***** check users and user groups ****//
if (!eregi("modules.php", $PHP_SELF)) {
die ("You can't access this file directly...");
}
if ($popup != "1"){
$module_name = basename(dirname(__FILE__));
require("modules/".$module_name."/nukebb.php");
}
else
{
$phpbb_root_path = 'modules/Forums/';
}

define('IN_PHPBB', true);
include($phpbb_root_path . 'extension.inc');
include($phpbb_root_path . 'common.'.$phpEx);
include('includes/functions_search.'.$phpEx);

// Start session management
$userdata = session_pagestart($user_ip, PAGE_SEARCH, $nukeuser);
init_userprefs($userdata);
// End session management

$sql = "SELECT user_id, username
FROM " . USERS_TABLE ."
WHERE user_id > 0";
if ( !($result = $db->sql_query($sql)) )
{
message_die(GENERAL_ERROR, 'Could not obtain user list', '', __LINE__, __FILE__, $sql);
}

$liste ='';
while ( $row = $db->sql_fetchrow($result) )
{
$username = $row['username'];
$user_id = $row['user_id'];
$usergroup = '';

$sql1 = "SELECT ug.group_id
FROM " . USER_GROUP_TABLE ." ug, ". GROUPS_TABLE. " g
WHERE ug.user_id = $user_id
AND ug.group_id = g.group_id
AND g.group_single_user = 1
";

if ( ($result1 = $db->sql_query($sql1)) )
{
$row1 = $db->sql_fetchrow($result1);
$usergroup =( ( $row1['group_id'] != '' ) ? $row1['group_id'] : 'User has no user group'.$row1 );

}

if (!($row1['group_id'] != ''))
{

$sql2 = "SELECT MAX(group_id) AS total
FROM " . GROUPS_TABLE;
if ( !($result2 = $db->sql_query($sql2)) )
{
message_die(GENERAL_ERROR, 'Could not obtain next group_id information', '', __LINE__, __FILE__, $sq2l);
}

if ( !($row2 = $db->sql_fetchrow($result2)) )
{
message_die(GENERAL_ERROR, 'Could not obtain next group_id information', '', __LINE__, __FILE__, $sql2);
}
$group_id = $row2['total'] + 1;

$sql3 = "INSERT INTO " . GROUPS_TABLE . " (group_id, group_name, group_description, group_single_user, group_moderator)
VALUES ($group_id, '', 'Personal User', 1, 0)";
if ( !($result3 = $db->sql_query($sql3, BEGIN_TRANSACTION)) )
{
message_die(GENERAL_ERROR, 'Could not insert data into groups table', '', __LINE__, __FILE__, $sql3);
}

$sql4 = "INSERT INTO " . USER_GROUP_TABLE . " (user_id, group_id, user_pending)
VALUES ($user_id, $group_id, 0)";
if( !($result4 = $db->sql_query($sql4, END_TRANSACTION)) )
{
message_die(GENERAL_ERROR, 'Could not insert data into user_group table', '', __LINE__, __FILE__, $sql4);
}

$usergroup = $usergroup.', adding user group '.$group_id;
}

$liste .= ( ( $liste != '' ) ? '<br> ' : '' ) . $username.' <b>'.$usergroup.'</b>';
}

message_die(GENERAL_MESSAGE,'Users:<br>'.$liste);

?>

Place it in the Forum's folder and point your browser to

Only registered users can see links on this board!
Get registered or login to the forums!

CODR3SH · New Member Joined: Jun 11, 2005 Posts: 15

Thank You.

boardmerlin · Posted: Tue Jun 28, 2005 11:25 pm

I was getting the same error, then patched the whole site and it is working great!